Hi all,
Maybe i overlook it somewhere, but i cannot find it.
I want to install a PHP script for automatic thumbnail creation with security etc. In the requirements of the program it states: must support php > 4.3.0 and gdlib > 2.0.1.
Does the QNAP TS-101 has this, so can i use this program?
The program is tinywebgallery http://www.tinywebgallery.com
Thanks in advance!
Andries
PHP version
-
- Starting out
- Posts: 14
- Joined: Wed Sep 05, 2007 7:43 pm
PHP version
QNAP TS-101 running 2.1.0 Build 0612
Seagate Barracuda 7200.10 500GB,7200rpm,16M,SATAII
Wired 100MB Connection
Pinnacle Soundbridge M1001
The Netherlands
Seagate Barracuda 7200.10 500GB,7200rpm,16M,SATAII
Wired 100MB Connection
Pinnacle Soundbridge M1001
The Netherlands
- kent
- QNAP Staff
- Posts: 198
- Joined: Fri Aug 31, 2007 5:21 pm
- Location: Taipei, Taiwan
You can refer to the following instructions to check the version and information of the Web Server services, including PHP, SQLite, GD etc.
1. Enable Web Server of this server.
2. Create a php file and write the following codes:
<phpinfo>
3. Name this file as phpinfo.php and save to the Qweb folder of this server.
4. Enter http://yourIP/phpinfo.php in the web browser; you can view the related details.
5. Checking finished. It is recommended that you delete this file to avoid divulging the information of the Web Server and ensure server security.
1. Enable Web Server of this server.
2. Create a php file and write the following codes:
<phpinfo>
3. Name this file as phpinfo.php and save to the Qweb folder of this server.
4. Enter http://yourIP/phpinfo.php in the web browser; you can view the related details.
5. Checking finished. It is recommended that you delete this file to avoid divulging the information of the Web Server and ensure server security.
I am Kent. Nice to meet you!
-
- Starting out
- Posts: 14
- Joined: Wed Sep 05, 2007 7:43 pm
Hi Kent,
Thanks for the info.
with <phpinfo> in the file, nothing happens. You have to put in:
<?php
phpinfo();
?>
then you get a page with all the info.
But what about the gdlib? I see something wih GD on the output of the phpinfo, so does it support this?
Thanks,
Andries
Thanks for the info.
with <phpinfo> in the file, nothing happens. You have to put in:
<?php
phpinfo();
?>
then you get a page with all the info.
But what about the gdlib? I see something wih GD on the output of the phpinfo, so does it support this?
Thanks,
Andries
QNAP TS-101 running 2.1.0 Build 0612
Seagate Barracuda 7200.10 500GB,7200rpm,16M,SATAII
Wired 100MB Connection
Pinnacle Soundbridge M1001
The Netherlands
Seagate Barracuda 7200.10 500GB,7200rpm,16M,SATAII
Wired 100MB Connection
Pinnacle Soundbridge M1001
The Netherlands