Switch to turn Front-Panel LED's on and out
-
- Starting out
- Posts: 33
- Joined: Mon Sep 10, 2007 6:53 pm
Switch to turn Front-Panel LED's on and out
Hi QNAP,
my NAS works so perfect now Big Thanks for this great product.
I'm planning to run the NAS 24/7 in my room, but I miss one thing. How about a little switch to turn on and off the front status LEDs?
A shell-command would also be as helpfull as a general feature.
Big thanks for that.
my NAS works so perfect now Big Thanks for this great product.
I'm planning to run the NAS 24/7 in my room, but I miss one thing. How about a little switch to turn on and off the front status LEDs?
A shell-command would also be as helpfull as a general feature.
Big thanks for that.
- kent
- QNAP Staff
- Posts: 198
- Joined: Fri Aug 31, 2007 5:21 pm
- Location: Taipei, Taiwan
- christian
- Moderator
- Posts: 754
- Joined: Tue Sep 04, 2007 5:27 pm
- Location: Germany
- Contact:
- QNAPIvan
- Experience counts
- Posts: 1020
- Joined: Mon Jul 02, 2007 4:03 pm
To turn off the Status LED only is the currrent spec definition of Sleep mode. Sorry if this doesn't match what you expect.
________________________________________
Product Marketing Director
USA Online Support: http://www.qnap.com/i/useng/before_buy/ ... wone&cid=2
Support email: q_supportus@qnap.com
USA Technical Support: +1 909 595 2782
Product Marketing Director
USA Online Support: http://www.qnap.com/i/useng/before_buy/ ... wone&cid=2
Support email: q_supportus@qnap.com
USA Technical Support: +1 909 595 2782
-
- New here
- Posts: 7
- Joined: Wed Oct 03, 2007 5:15 am
Re: Switch to turn Front-Panel LED's on and out
Just get yourself some black electrical insulation tape and stick it over the LED's .Deathstar wrote: I'm planning to run the NAS 24/7 in my room, but I miss one thing. How about a little switch to turn on and off the front status LEDs?
-
- New here
- Posts: 7
- Joined: Wed Oct 03, 2007 5:15 am
-
- First post
- Posts: 1
- Joined: Tue Oct 09, 2007 12:41 am
If not ALL but there are some to turn off. Can you tell which one? And how (script based)?kent wrote:Currently, there is no command to turn off ALL LED, because some LED is controled by hardware designed.
I suggest you to turn off your TS server when you sleep...and it is save power...and save money...
mfg, rm