TS-209 Strange Warning "Re-launch process [btd]"
-
- Starting out
- Posts: 20
- Joined: Tue Sep 04, 2007 2:14 am
- Location: Germany
- Contact:
TS-209 Strange Warning "Re-launch process [btd]"
Hello,
I find a warning after rebooting my NAS:
Warning Re-launch process [btd]
It appears every 30 seconds within the event log.
Does anyone knows what this means and what is to do solve the problem ?
---------------------------------------------
TS-209 with FW 1.1.1
2 X SAMSUNG HD501LJ (500 Gig)
Using Linear Disc Volume
I find a warning after rebooting my NAS:
Warning Re-launch process [btd]
It appears every 30 seconds within the event log.
Does anyone knows what this means and what is to do solve the problem ?
---------------------------------------------
TS-209 with FW 1.1.1
2 X SAMSUNG HD501LJ (500 Gig)
Using Linear Disc Volume
-
- Starting out
- Posts: 20
- Joined: Tue Sep 04, 2007 2:14 am
- Location: Germany
- Contact:
Seems to be a Problem with the Download Manager
I find out, that the warning within the event log has something to do with the download manager.
I tried to start the task using the startup script (/etc/init.d/btd.sh) and got the error:
*** glibc detected *** double free or corruption (!prev): 0x0001f220 ***
---------------------------------------------
TS-209 with FW 1.1.1
2 X SAMSUNG HD501LJ (500 Gig)
Using Linear Disc Volume
I tried to start the task using the startup script (/etc/init.d/btd.sh) and got the error:
*** glibc detected *** double free or corruption (!prev): 0x0001f220 ***
---------------------------------------------
TS-209 with FW 1.1.1
2 X SAMSUNG HD501LJ (500 Gig)
Using Linear Disc Volume
-
- Starting out
- Posts: 20
- Joined: Tue Sep 04, 2007 2:14 am
- Location: Germany
- Contact:
- kent
- QNAP Staff
- Posts: 198
- Joined: Fri Aug 31, 2007 5:21 pm
- Location: Taipei, Taiwan
The process "btd" is the bt download daemon. So can you download BT successfully?ingo wrote:Hi Kent,
thank you for the answer.
I use the latest Firmware Version 1.1.1. Currently an external access is not configured. Is there anything I can check on OS level ?
---------------------------------------------
TS-209 with FW 1.1.1
2 X SAMSUNG HD501LJ (500 Gig)
Using Linear Disc Volume
If the message was appeared every 30 sec, then I think it must have some problem in your system.
Please pm me your IP, admin password, and enable ssh login. I will check it for you!
I am Kent. Nice to meet you!
-
- Starting out
- Posts: 20
- Joined: Tue Sep 04, 2007 2:14 am
- Location: Germany
- Contact:
I solved this issue by deleting all torrents. It seems that one torrent had a incorrect design.
Strange is that the error occures days after I had added the last torrent to my download list.
Strange is that the error occures days after I had added the last torrent to my download list.
TS-119+ with Firmware 3.6.1
Western Digital WD20EARX (2000 Gig)
TS-209 with Firmware 3.3.2
2 x SAMSUNG HD501LJ (500 Gig)
Using Linear Disc Volume
Fritzbox Phone/WLAN 7270
- kent
- QNAP Staff
- Posts: 198
- Joined: Fri Aug 31, 2007 5:21 pm
- Location: Taipei, Taiwan
-
- Starting out
- Posts: 20
- Joined: Tue Sep 04, 2007 2:14 am
- Location: Germany
- Contact:
-
- Starting out
- Posts: 12
- Joined: Sun Sep 23, 2007 3:34 am
Yes I am using a UPS (Belkin Universal UPS 800VA). However I could not configure the NAT to communicate with the UPS.
I have reverted to NAS firmware 1.1.0, and there are no longer any warning messages. Of course, it could just be changing the firmware version removed some options in the settings?
Are there any plans on bringing out a new version of the firmware? I'm just concerned that I have brought the QNAP 209 and will be left with firmware that has issues...
I have reverted to NAS firmware 1.1.0, and there are no longer any warning messages. Of course, it could just be changing the firmware version removed some options in the settings?
Are there any plans on bringing out a new version of the firmware? I'm just concerned that I have brought the QNAP 209 and will be left with firmware that has issues...
-
- New here
- Posts: 9
- Joined: Thu Sep 27, 2007 3:18 am
- Location: Italy
I have the same warning Re-launch process [btd] since a few days in the event log. Each 30 seconds. Since then, the downloads are not working anymore.
I tried a lot of things: remove all downloads, restart the NAS, install new Firmware (1009). But no success.
If I run "/etc/init.d/btd.sh start" manually, I get:
*** glibc detected *** free(): invalid next size (normal): 0x0001e050 ***
Any hints?
I tried a lot of things: remove all downloads, restart the NAS, install new Firmware (1009). But no success.
If I run "/etc/init.d/btd.sh start" manually, I get:
*** glibc detected *** free(): invalid next size (normal): 0x0001e050 ***
Any hints?
TS-109 v2.1.0 0904T with WD5000YS (500GB)
3Com GigaSwitch, AVM router FB7050
2 xp, 1 w2k and 1 ubuntu 8 client
Deskjet 970cxi, Dell Laser 1700n, Roku Soundbridge
3Com GigaSwitch, AVM router FB7050
2 xp, 1 w2k and 1 ubuntu 8 client
Deskjet 970cxi, Dell Laser 1700n, Roku Soundbridge
-
- Been there, done that
- Posts: 700
- Joined: Mon Aug 27, 2007 1:16 pm
- Location: Taipei
- Contact:
Hi gweis,
The file /etc/config/downloadlist may be corrupted. You can follow the steps below to delete it and restart btd.
1. Telnet to NAS
2. Enter rm -rf /etc/config/downloadlist
3. Enter /etc/init.d/btd.sh restart
Hope this helps.
The file /etc/config/downloadlist may be corrupted. You can follow the steps below to delete it and restart btd.
1. Telnet to NAS
2. Enter rm -rf /etc/config/downloadlist
3. Enter /etc/init.d/btd.sh restart
Hope this helps.
Online Support Form: http://www.qnap.com/onlinesupport.asp
Support email: q_support@qnap.com.tw
MSN: q.support@hotmail.com
Skype: qnapskype
Support email: q_support@qnap.com.tw
MSN: q.support@hotmail.com
Skype: qnapskype
- Q
- Experience counts
- Posts: 1436
- Joined: Wed Sep 05, 2007 4:18 pm
- Location: Switzerland
- Contact:
- QNAPIvan
- Experience counts
- Posts: 1020
- Joined: Mon Jul 02, 2007 4:03 pm
Hi, Qi also got a customer who has the UPS daemon restarted often with the message "Warnung Re-launch process [genpowerd]." firmware 1.1.2
We need more info to clarify if this is an issue.
Currently as I know if user to enable the UPS deamon but without connecting to a UPS, then it will show the warning message.
Cheers,
________________________________________
Product Marketing Director
USA Online Support: http://www.qnap.com/i/useng/before_buy/ ... wone&cid=2
Support email: q_supportus@qnap.com
USA Technical Support: +1 909 595 2782
Product Marketing Director
USA Online Support: http://www.qnap.com/i/useng/before_buy/ ... wone&cid=2
Support email: q_supportus@qnap.com
USA Technical Support: +1 909 595 2782