Raid cannot rebuild automatically
-
- Starting out
- Posts: 40
- Joined: Mon Sep 10, 2007 5:39 pm
Raid cannot rebuild automatically
Pls see picture below:
.
Raid 1 already in degraded mode,
but it doesn't rebuild automatically.
what should I do?
Here is the offical rebuild procedure:
http://www.qnap.com.tw/images/products/ ... 09AP09.htm
.
Raid 1 already in degraded mode,
but it doesn't rebuild automatically.
what should I do?
Here is the offical rebuild procedure:
http://www.qnap.com.tw/images/products/ ... 09AP09.htm
- QNAPIvan
- Experience counts
- Posts: 1020
- Joined: Mon Jul 02, 2007 4:03 pm
You are in the 3rd step.
Go to the Event Log section to check which hard disk is failed.
Follow the steps to swap to a new one.
The NAS system will auto-rebuild the RAID again.
Cheers,
Go to the Event Log section to check which hard disk is failed.
Follow the steps to swap to a new one.
The NAS system will auto-rebuild the RAID again.
Cheers,
________________________________________
Product Marketing Director
USA Online Support: http://www.qnap.com/i/useng/before_buy/ ... wone&cid=2
Support email: q_supportus@qnap.com
USA Technical Support: +1 909 595 2782
Product Marketing Director
USA Online Support: http://www.qnap.com/i/useng/before_buy/ ... wone&cid=2
Support email: q_supportus@qnap.com
USA Technical Support: +1 909 595 2782
-
- Starting out
- Posts: 40
- Joined: Mon Sep 10, 2007 5:39 pm
I see the TWO hd status is ready.=>Is this show the hd physical healthy?
If one hd is really fault,
should I take one of the hd to repair.
If one hd is really fault,
should I take one of the hd to repair.
QNAPIvan wrote:You are in the 3rd step.
Go to the Event Log section to check which hard disk is failed.
Follow the steps to swap to a new one.
The NAS system will auto-rebuild the RAID again.
Cheers,
- QNAPIvan
- Experience counts
- Posts: 1020
- Joined: Mon Jul 02, 2007 4:03 pm
Can you go to the main administration page, and select the "Event Log" to check the hdd status?
Cheers,
Cheers,
________________________________________
Product Marketing Director
USA Online Support: http://www.qnap.com/i/useng/before_buy/ ... wone&cid=2
Support email: q_supportus@qnap.com
USA Technical Support: +1 909 595 2782
Product Marketing Director
USA Online Support: http://www.qnap.com/i/useng/before_buy/ ... wone&cid=2
Support email: q_supportus@qnap.com
USA Technical Support: +1 909 595 2782
-
- Starting out
- Posts: 40
- Joined: Mon Sep 10, 2007 5:39 pm
I like to measure the ability of raid 1 and hot swap, so I draw one hd in off line mode
->switch on system
->find problem and fear to loss data
->switch off system
->plug back one hd
-> result
->try to fix the problem by lucky, draw TWO hd at same time
->switch on
->switch off
->plug in back the two hd
->switch on
->Bad Blocks Scan for TWO hd and completed.
->two hd seem healthy
->this is current status
.
I want mount the hd without loss the data, what is the next step?
->switch on system
->find problem and fear to loss data
->switch off system
->plug back one hd
-> result
->try to fix the problem by lucky, draw TWO hd at same time
->switch on
->switch off
->plug in back the two hd
->switch on
->Bad Blocks Scan for TWO hd and completed.
->two hd seem healthy
->this is current status
.
I want mount the hd without loss the data, what is the next step?
- kent
- QNAP Staff
- Posts: 198
- Joined: Fri Aug 31, 2007 5:21 pm
- Location: Taipei, Taiwan
Please pm your info to me (include IP, admin password), and also please open port 22.cfo_work wrote:I like to measure the ability of raid 1 and hot swap, so I draw one hd in off line mode
->switch on system
->find problem and fear to loss data
->switch off system
->plug back one hd
-> result
->try to fix the problem by lucky, draw TWO hd at same time
->switch on
->switch off
->plug in back the two hd
->switch on
->Bad Blocks Scan for TWO hd and completed.
->two hd seem healthy
->this is current status
.
I want mount the hd without loss the data, what is the next step?
I am Kent. Nice to meet you!
-
- Starting out
- Posts: 10
- Joined: Thu Sep 20, 2007 1:00 am
Same Problem
Hello,
I have the exact same Problem! I just Purchased the Nas ts-209 pro.
I have two 500 gb drives installed, configured and raid 1 established...shortly after it was in de-graded mode... I removed a 420 gb of data (not fun!) and then rebuilt the RAID1...it went through unmout, format, resync...and then was fine for minutes...only too say in de-graded mode minutes later...I then Tried JBOD and linear which formated and established fine then...RAID1 again...AND STILL Degraded mode...The drives are new and must be fine....So what is the deal!??? Any suggestions....I've been emailed By Fan Chen at qnap who sent me this link http://www.qnap.com/images/products/App ... 9AP09.html but did not help... here are my logs for the most part are below...
I really do appreciate the help....
Guido
– View System Settings
Server Name
Server Name Nas
Date & Time
Date September 20, 2007
Time 12:59:34 AM
Time Zone (GMT-06:00) Central Time(US & Canada)
Filename Encoding
Code Page English (437)
System Information
Version 1.1.1 Build 0831T
1. ts-209 pro
2. 1.1.1
3. win xp pro with all current patches
4. ?
5. two
6. SAMSUNG SpinPoint T Series HD501LJ
7. 500GB 7200 RPM 16MB Cache SATA 3.0Gb/s Hard Drive - OEM
8. RAID 1
9. NFS, RECYCLE, WINDOWS Networking
10. NONE
11. not changed by me...I think 1500.
Warning [Mirror Disk Volume: Drive 1 2] Volume is in degrade mode.
09/20/2007 00:33:09
Information System started. 09/20/2007 00:32:59
Information System was shut down on Thu Sep 20 00:32:05 CDT 2007.
09/20/2007 00:32:05
Information Smart Fan Control: changed from [Fixed
mode-@��
�] to [Smart mode] successfully.
09/20/2007 00:31:18
Warning Enable Network Recycle Bin fail, because the disk raid is not
ready. 09/20/2007 00:29:51
Information Smart Fan Control: changed from [Fixed
mode-@��
�] to [Smart mode] successfully.
09/20/2007 00:28:47
Information [Mirror Disk Volume: Drive 1 2] Examination completed.
09/20/2007 00:24:41
Information [Mirror Disk Volume: Drive 1 2] Start examination.
09/20/2007 00:12:58
Warning [Drive 2] The scanning is stopped by user. 09/20/2007 00:05:39
Warning [Drive 1] The scanning is stopped by user. 09/20/2007 00:05:35
Information [Drive 2] Start Scanning bad blocks. 09/20/2007 00:00:07
Information [Drive 1] Start Scanning bad blocks. 09/20/2007 00:00:02
Information [Mirror Disk Volume: Drive 1 2] Examination completed.
09/19/2007 23:47:16
Information [Mirror Disk Volume: Drive 1 2] Start examination.
09/19/2007 23:35:29
Warning [Mirror Disk Volume: Drive 1 2] Volume is in degrade mode.
09/19/2007 23:32:18
Information System started. 09/19/2007 23:32:07
Information System was shut down on Wed Sep 19 23:31:12 CDT 2007.
09/19/2007 23:31:12
Information Microsoft Networking configured successfully. 09/19/2007
23:30:25
Warning [Mirror Disk Volume: Drive 1 2] Volume is in degrade mode.
09/19/2007 23:27:53
Information System started.
Information System was shut down on Wed Sep 19 23:26:48 CDT 2007.
09/19/2007 23:26:48
Warning [Mirror Disk Volume: Drive 1 2] Volume is in degrade mode.
09/19/2007 23:09:09
Information System started. 09/19/2007 23:08:57
Information System was shut down on Wed Sep 19 23:07:59 CDT 2007.
09/19/2007 23:07:59
Information Microsoft Networking configured successfully. 09/19/2007
23:06:31
Warning Re-launch process [ImRd]. 09/19/2007 22:24:48
Warning [Mirror Disk Volume: Drive 1 2] Volume is in degrade mode.
09/19/2007 21:59:24
Information System started. 09/19/2007 21:59:13
Information System was shut down on Wed Sep 19 17:08:09 CDT 2007.
09/19/2007 17:08:09
Warning [Mirror Disk Volume: Drive 1 2] Volume is in degrade mode.
09/19/2007 16:12:23
Information System started. 09/19/2007 16:12:12
Information System was shut down on Wed Sep 19 16:11:13 CDT 2007.
09/19/2007 16:11:13
Warning Re-launch process [ImRd]. 09/19/2007 16:05:35
Error Failed to synchronize the time from NTP server. 09/19/2007 14:51:48
Warning [Mirror Disk Volume: Drive 1 2] Volume is in degrade mode.
09/19/2007 14:51:14
Information System started. 09/19/2007 14:51:03
Information System was shut down on Wed Sep 19 14:50:06 CDT 2007.
09/19/2007 14:50:06
Information Microsoft Networking configured successfully. 09/19/2007
14:48:30
Information Microsoft Networking configured successfully. 09/19/2007
14:48:15
Warning [Mirror Disk Volume: Drive 1 2] Volume is in degrade mode.
09/19/2007 14:38:33
Information System started. 09/19/2007 14:38:22
Information System was shut down on Wed Sep 19 14:33:39 CDT 2007.
09/19/2007 14:33:39
Warning [Mirror Disk Volume: Drive 1 2] Volume is in degrade mode.
09/19/2007 14:29:39
Information System started. 09/19/2007 14:29:27
Information System was shut down on Wed Sep 19 14:28:31 CDT 2007.
09/19/2007 14:28:31
Warning [Mirror Disk Volume: Drive 1 2] Volume is in degrade mode.
09/19/2007 12:21:52
Information System started. 09/19/2007 12:21:41
Information System was shut down on Wed Sep 19 12:20:40 CDT 2007.
09/19/2007 12:20:41
Warning [Mirror Disk Volume: Drive 1 2] Volume is in degrade mode.
09/19/2007 00:33:23
Information System started.
Information System was shut down on Wed Sep 19 00:31:16 CDT 2007.
09/19/2007 00:31:16
Error NIC Link is Down. 09/19/2007 00:30:56
Information [NFS Service] started successfully. 09/19/2007 00:12:41
Information [NFS Service] stopped successfully. 09/19/2007 00:12:28
Information Microsoft Networking configured successfully. 09/19/2007
00:12:18
Information [NFS Service] started successfully. 09/19/2007 00:11:18
Information Microsoft Networking configured successfully. 09/19/2007
00:00:40
Information Microsoft Networking configured successfully. 09/19/2007
00:00:34
Information Microsoft Networking configured successfully. 09/19/2007
00:00:16
Information Microsoft Networking configured successfully. 09/18/2007
23:35:5
nformation Smart Fan Control: changed from [Fixed
mode-@��
�] to [Smart mode] successfully.
09/18/2007 23:30:31
Information System started. 09/19/2007 22:44:17
Information System was shut down on Wed Sep 19 22:42:38 CDT 2007.
09/19/2007 22:42:38
Information System was updated successfully. 09/19/2007 22:42:36
Information [Mirror Disk Volume: Drive 1 2] Initialization completed.
09/19/2007 22:38:59
Information [Mirror Disk Volume: Drive 1 2] Formatting completed.
09/19/2007 05:38:41
Information [Mirror Disk Volume: Drive 1 2] Start formatting.
09/19/2007 05:32:40
Information [Mirror Disk Volume: Drive 1 2] Start initialization.
09/19/2007 05:30:50
Information Finder (from LAPTOP) is going to make changes on system
settings, all services will be stopped. 09/19/2007 05:30:37
Information System started.
I have the exact same Problem! I just Purchased the Nas ts-209 pro.
I have two 500 gb drives installed, configured and raid 1 established...shortly after it was in de-graded mode... I removed a 420 gb of data (not fun!) and then rebuilt the RAID1...it went through unmout, format, resync...and then was fine for minutes...only too say in de-graded mode minutes later...I then Tried JBOD and linear which formated and established fine then...RAID1 again...AND STILL Degraded mode...The drives are new and must be fine....So what is the deal!??? Any suggestions....I've been emailed By Fan Chen at qnap who sent me this link http://www.qnap.com/images/products/App ... 9AP09.html but did not help... here are my logs for the most part are below...
I really do appreciate the help....
Guido
– View System Settings
Server Name
Server Name Nas
Date & Time
Date September 20, 2007
Time 12:59:34 AM
Time Zone (GMT-06:00) Central Time(US & Canada)
Filename Encoding
Code Page English (437)
System Information
Version 1.1.1 Build 0831T
1. ts-209 pro
2. 1.1.1
3. win xp pro with all current patches
4. ?
5. two
6. SAMSUNG SpinPoint T Series HD501LJ
7. 500GB 7200 RPM 16MB Cache SATA 3.0Gb/s Hard Drive - OEM
8. RAID 1
9. NFS, RECYCLE, WINDOWS Networking
10. NONE
11. not changed by me...I think 1500.
Warning [Mirror Disk Volume: Drive 1 2] Volume is in degrade mode.
09/20/2007 00:33:09
Information System started. 09/20/2007 00:32:59
Information System was shut down on Thu Sep 20 00:32:05 CDT 2007.
09/20/2007 00:32:05
Information Smart Fan Control: changed from [Fixed
mode-@��
�] to [Smart mode] successfully.
09/20/2007 00:31:18
Warning Enable Network Recycle Bin fail, because the disk raid is not
ready. 09/20/2007 00:29:51
Information Smart Fan Control: changed from [Fixed
mode-@��
�] to [Smart mode] successfully.
09/20/2007 00:28:47
Information [Mirror Disk Volume: Drive 1 2] Examination completed.
09/20/2007 00:24:41
Information [Mirror Disk Volume: Drive 1 2] Start examination.
09/20/2007 00:12:58
Warning [Drive 2] The scanning is stopped by user. 09/20/2007 00:05:39
Warning [Drive 1] The scanning is stopped by user. 09/20/2007 00:05:35
Information [Drive 2] Start Scanning bad blocks. 09/20/2007 00:00:07
Information [Drive 1] Start Scanning bad blocks. 09/20/2007 00:00:02
Information [Mirror Disk Volume: Drive 1 2] Examination completed.
09/19/2007 23:47:16
Information [Mirror Disk Volume: Drive 1 2] Start examination.
09/19/2007 23:35:29
Warning [Mirror Disk Volume: Drive 1 2] Volume is in degrade mode.
09/19/2007 23:32:18
Information System started. 09/19/2007 23:32:07
Information System was shut down on Wed Sep 19 23:31:12 CDT 2007.
09/19/2007 23:31:12
Information Microsoft Networking configured successfully. 09/19/2007
23:30:25
Warning [Mirror Disk Volume: Drive 1 2] Volume is in degrade mode.
09/19/2007 23:27:53
Information System started.
Information System was shut down on Wed Sep 19 23:26:48 CDT 2007.
09/19/2007 23:26:48
Warning [Mirror Disk Volume: Drive 1 2] Volume is in degrade mode.
09/19/2007 23:09:09
Information System started. 09/19/2007 23:08:57
Information System was shut down on Wed Sep 19 23:07:59 CDT 2007.
09/19/2007 23:07:59
Information Microsoft Networking configured successfully. 09/19/2007
23:06:31
Warning Re-launch process [ImRd]. 09/19/2007 22:24:48
Warning [Mirror Disk Volume: Drive 1 2] Volume is in degrade mode.
09/19/2007 21:59:24
Information System started. 09/19/2007 21:59:13
Information System was shut down on Wed Sep 19 17:08:09 CDT 2007.
09/19/2007 17:08:09
Warning [Mirror Disk Volume: Drive 1 2] Volume is in degrade mode.
09/19/2007 16:12:23
Information System started. 09/19/2007 16:12:12
Information System was shut down on Wed Sep 19 16:11:13 CDT 2007.
09/19/2007 16:11:13
Warning Re-launch process [ImRd]. 09/19/2007 16:05:35
Error Failed to synchronize the time from NTP server. 09/19/2007 14:51:48
Warning [Mirror Disk Volume: Drive 1 2] Volume is in degrade mode.
09/19/2007 14:51:14
Information System started. 09/19/2007 14:51:03
Information System was shut down on Wed Sep 19 14:50:06 CDT 2007.
09/19/2007 14:50:06
Information Microsoft Networking configured successfully. 09/19/2007
14:48:30
Information Microsoft Networking configured successfully. 09/19/2007
14:48:15
Warning [Mirror Disk Volume: Drive 1 2] Volume is in degrade mode.
09/19/2007 14:38:33
Information System started. 09/19/2007 14:38:22
Information System was shut down on Wed Sep 19 14:33:39 CDT 2007.
09/19/2007 14:33:39
Warning [Mirror Disk Volume: Drive 1 2] Volume is in degrade mode.
09/19/2007 14:29:39
Information System started. 09/19/2007 14:29:27
Information System was shut down on Wed Sep 19 14:28:31 CDT 2007.
09/19/2007 14:28:31
Warning [Mirror Disk Volume: Drive 1 2] Volume is in degrade mode.
09/19/2007 12:21:52
Information System started. 09/19/2007 12:21:41
Information System was shut down on Wed Sep 19 12:20:40 CDT 2007.
09/19/2007 12:20:41
Warning [Mirror Disk Volume: Drive 1 2] Volume is in degrade mode.
09/19/2007 00:33:23
Information System started.
Information System was shut down on Wed Sep 19 00:31:16 CDT 2007.
09/19/2007 00:31:16
Error NIC Link is Down. 09/19/2007 00:30:56
Information [NFS Service] started successfully. 09/19/2007 00:12:41
Information [NFS Service] stopped successfully. 09/19/2007 00:12:28
Information Microsoft Networking configured successfully. 09/19/2007
00:12:18
Information [NFS Service] started successfully. 09/19/2007 00:11:18
Information Microsoft Networking configured successfully. 09/19/2007
00:00:40
Information Microsoft Networking configured successfully. 09/19/2007
00:00:34
Information Microsoft Networking configured successfully. 09/19/2007
00:00:16
Information Microsoft Networking configured successfully. 09/18/2007
23:35:5
nformation Smart Fan Control: changed from [Fixed
mode-@��
�] to [Smart mode] successfully.
09/18/2007 23:30:31
Information System started. 09/19/2007 22:44:17
Information System was shut down on Wed Sep 19 22:42:38 CDT 2007.
09/19/2007 22:42:38
Information System was updated successfully. 09/19/2007 22:42:36
Information [Mirror Disk Volume: Drive 1 2] Initialization completed.
09/19/2007 22:38:59
Information [Mirror Disk Volume: Drive 1 2] Formatting completed.
09/19/2007 05:38:41
Information [Mirror Disk Volume: Drive 1 2] Start formatting.
09/19/2007 05:32:40
Information [Mirror Disk Volume: Drive 1 2] Start initialization.
09/19/2007 05:30:50
Information Finder (from LAPTOP) is going to make changes on system
settings, all services will be stopped. 09/19/2007 05:30:37
Information System started.
-
- Starting out
- Posts: 10
- Joined: Thu Sep 20, 2007 1:00 am
Have just tried it again and this is the result.
–Physical Disks
Disk Model Capacity Status Bad Blocks Scan
Drive 1 SAMSUNG HD501LJ CR10 465.76 GB Ready Scan now...
Drive 2 SAMSUNG HD501LJ CR10 465.76 GB Ready Scan now...
–Logical Volumes
Volume Total Size Free Size Status Format Check Disk
Mirroring Disk Volume: Drive 1 2 457.38 GB 456.55 GB In degraded mode
Information [Mirror Disk Volume: Drive 1 2] Examination completed. 09/21/2007 22:11:13
Information [Mirror Disk Volume: Drive 1 2] Start examination. 09/21/2007 22:02:21
Information Smart Fan Control: changed from [Fixed mode-@���] to [Smart mode] successfully. 09/21/2007 21:59:54
Information Microsoft Networking configured successfully. 09/21/2007 21:50:20
Information [Mirror Disk Volume: Drive 1 2] Initialization completed. 09/21/2007 21:21:16
Information [Mirror Disk Volume: Drive 1 2] Formatting completed. 09/21/2007 21:18:50
Information [Mirror Disk Volume: Drive 1 2] Start formatting. 09/21/2007 21:13:22
Information [Mirror Disk Volume: Drive 1 2] Start initialization. 09/21/2007 21:12:37
Information [Mirror Disk Volume: Drive 1 2] Removal completed. 09/21/2007 21:12:20
Information [Mirror Disk Volume: Drive 1 2] Start removal 09/21/2007 21:11:58
Information [NFS Service] stopped successfully. 09/21/2007 21:11:06
Information NIC Link is Up. 09/21/2007 21:08:55
Error NIC Link is Down. 09/21/2007 21:08:52
Warning [Mirror Disk Volume: Drive 1 2] Volume is in degrade mode. 09/21/2007 21:03:05
Information System started. 09/21/2007 21:00:34
Warning The system was not shut down properly last time. 09/21/2007 21:00:32[/img]
–Physical Disks
Disk Model Capacity Status Bad Blocks Scan
Drive 1 SAMSUNG HD501LJ CR10 465.76 GB Ready Scan now...
Drive 2 SAMSUNG HD501LJ CR10 465.76 GB Ready Scan now...
–Logical Volumes
Volume Total Size Free Size Status Format Check Disk
Mirroring Disk Volume: Drive 1 2 457.38 GB 456.55 GB In degraded mode
Information [Mirror Disk Volume: Drive 1 2] Examination completed. 09/21/2007 22:11:13
Information [Mirror Disk Volume: Drive 1 2] Start examination. 09/21/2007 22:02:21
Information Smart Fan Control: changed from [Fixed mode-@���] to [Smart mode] successfully. 09/21/2007 21:59:54
Information Microsoft Networking configured successfully. 09/21/2007 21:50:20
Information [Mirror Disk Volume: Drive 1 2] Initialization completed. 09/21/2007 21:21:16
Information [Mirror Disk Volume: Drive 1 2] Formatting completed. 09/21/2007 21:18:50
Information [Mirror Disk Volume: Drive 1 2] Start formatting. 09/21/2007 21:13:22
Information [Mirror Disk Volume: Drive 1 2] Start initialization. 09/21/2007 21:12:37
Information [Mirror Disk Volume: Drive 1 2] Removal completed. 09/21/2007 21:12:20
Information [Mirror Disk Volume: Drive 1 2] Start removal 09/21/2007 21:11:58
Information [NFS Service] stopped successfully. 09/21/2007 21:11:06
Information NIC Link is Up. 09/21/2007 21:08:55
Error NIC Link is Down. 09/21/2007 21:08:52
Warning [Mirror Disk Volume: Drive 1 2] Volume is in degrade mode. 09/21/2007 21:03:05
Information System started. 09/21/2007 21:00:34
Warning The system was not shut down properly last time. 09/21/2007 21:00:32[/img]
-
- Been there, done that
- Posts: 700
- Joined: Mon Aug 27, 2007 1:16 pm
- Location: Taipei
- Contact:
Hi praetorian,
Sorry for the problems. We'll forward your questions to the technical support team.
Sorry for the problems. We'll forward your questions to the technical support team.
Online Support Form: http://www.qnap.com/onlinesupport.asp
Support email: q_support@qnap.com.tw
MSN: q.support@hotmail.com
Skype: qnapskype
Support email: q_support@qnap.com.tw
MSN: q.support@hotmail.com
Skype: qnapskype
-
- Starting out
- Posts: 10
- Joined: Thu Sep 20, 2007 1:00 am
Well i'm not one to wait too long for help to come...So I've removed my drives from the ts-209 pro, placed them on main server and removed all the qnap formated partitions. I then place my ts-209 pro in default setting by reset and the reinstalled the drives. Oddly there is a differnce in the size and space avail. of the drives and raid.
OLD
–Physical Disks
Disk Model Capacity Status Bad Blocks Scan
Drive 1 SAMSUNG HD501LJ CR10 465.76 GB Ready Scan now...
Drive 2 SAMSUNG HD501LJ CR10 465.76 GB Ready Scan now...
–Logical Volumes
Volume Total Size Free Size Status Format Check Disk
Mirroring Disk Volume: Drive 1 2 457.38 GB 456.55 GB In degraded mode
NEW
Disk Model Capacity Status Bad Blocks Scan
Drive 1 SAMSUNG HD501LJ CR10 465.76 GB Ready Scan now...
Drive 2 SAMSUNG HD501LJ CR10 465.76 GB Ready Scan now...
–Logical Volumes
Volume Total Size Free Size Status Format Check Disk
Mirroring Disk Volume: Drive 1 2 457.38 GB 457.18 GB Ready [Resync 49%]
Display All eventsWarnings and errorsErrors only There are 9 events. All1
LOG
Type Content Date Time
Information System started. 09/27/2007 00:05:17
Information System was shut down on Thu Sep 27 00:03:36 CDT 2007. 09/27/2007 00:03:36
Information System was updated successfully. 09/27/2007 00:03:25
Information [Mirror Disk Volume: Drive 1 2] Initialization completed. 09/26/2007 23:59:40
Information [Mirror Disk Volume: Drive 1 2] Formatting completed. 09/26/2007 23:58:00
Information [Mirror Disk Volume: Drive 1 2] Start formatting. 09/26/2007 23:51:49
Information [Mirror Disk Volume: Drive 1 2] Start initialization. 09/26/2007 23:50:22
Information Finder (from LAPTOP) is going to make changes on system settings, all services will be stopped. 09/26/2007 23:50:09
Information System started. 09/26/2007 23:42:56
Why is it resynching after it was only just created ...is it because after the discovery and config. with firmware upgrade and restart it needs to resynch???
The lower one is still resynching but neither had data so why the difference---Odd don't you think.
Would there be any benefit in adding a page in the firmware for advanced users to delete partitons at will right from the unit to slick the drives rather than telnet or drive removal...
OLD
–Physical Disks
Disk Model Capacity Status Bad Blocks Scan
Drive 1 SAMSUNG HD501LJ CR10 465.76 GB Ready Scan now...
Drive 2 SAMSUNG HD501LJ CR10 465.76 GB Ready Scan now...
–Logical Volumes
Volume Total Size Free Size Status Format Check Disk
Mirroring Disk Volume: Drive 1 2 457.38 GB 456.55 GB In degraded mode
NEW
Disk Model Capacity Status Bad Blocks Scan
Drive 1 SAMSUNG HD501LJ CR10 465.76 GB Ready Scan now...
Drive 2 SAMSUNG HD501LJ CR10 465.76 GB Ready Scan now...
–Logical Volumes
Volume Total Size Free Size Status Format Check Disk
Mirroring Disk Volume: Drive 1 2 457.38 GB 457.18 GB Ready [Resync 49%]
Display All eventsWarnings and errorsErrors only There are 9 events. All1
LOG
Type Content Date Time
Information System started. 09/27/2007 00:05:17
Information System was shut down on Thu Sep 27 00:03:36 CDT 2007. 09/27/2007 00:03:36
Information System was updated successfully. 09/27/2007 00:03:25
Information [Mirror Disk Volume: Drive 1 2] Initialization completed. 09/26/2007 23:59:40
Information [Mirror Disk Volume: Drive 1 2] Formatting completed. 09/26/2007 23:58:00
Information [Mirror Disk Volume: Drive 1 2] Start formatting. 09/26/2007 23:51:49
Information [Mirror Disk Volume: Drive 1 2] Start initialization. 09/26/2007 23:50:22
Information Finder (from LAPTOP) is going to make changes on system settings, all services will be stopped. 09/26/2007 23:50:09
Information System started. 09/26/2007 23:42:56
Why is it resynching after it was only just created ...is it because after the discovery and config. with firmware upgrade and restart it needs to resynch???
The lower one is still resynching but neither had data so why the difference---Odd don't you think.
Would there be any benefit in adding a page in the firmware for advanced users to delete partitons at will right from the unit to slick the drives rather than telnet or drive removal...
-
- Starting out
- Posts: 10
- Joined: Thu Sep 20, 2007 1:00 am
the end result of all this...
–Physical Disks
Disk Model Capacity Status Bad Blocks Scan
Drive 1 SAMSUNG HD501LJ CR10 465.76 GB Ready Scan now...
Drive 2 SAMSUNG HD501LJ CR10 465.76 GB Ready Scan now...
–Logical Volumes
Volume Total Size Free Size Status Format Check Disk
Mirroring Disk Volume: Drive 1 2 457.38 GB 457.18 GB In degraded mode
Re formated
Current Disk Volume Configuration
–Physical Disks
Disk Model Capacity Status Bad Blocks Scan
Drive 1 SAMSUNG HD501LJ CR10 465.76 GB Ready Scan now...
Drive 2 SAMSUNG HD501LJ CR10 465.76 GB Ready Scan now...
–Logical Volumes
Volume Total Size Free Size Status Format Check Disk
Mirroring Disk Volume: Drive 1 2 457.38 GB 457.23 GB In degraded mode Format now... Check now...
What's the deal???
[/b]
–Physical Disks
Disk Model Capacity Status Bad Blocks Scan
Drive 1 SAMSUNG HD501LJ CR10 465.76 GB Ready Scan now...
Drive 2 SAMSUNG HD501LJ CR10 465.76 GB Ready Scan now...
–Logical Volumes
Volume Total Size Free Size Status Format Check Disk
Mirroring Disk Volume: Drive 1 2 457.38 GB 457.18 GB In degraded mode
Re formated
Current Disk Volume Configuration
–Physical Disks
Disk Model Capacity Status Bad Blocks Scan
Drive 1 SAMSUNG HD501LJ CR10 465.76 GB Ready Scan now...
Drive 2 SAMSUNG HD501LJ CR10 465.76 GB Ready Scan now...
–Logical Volumes
Volume Total Size Free Size Status Format Check Disk
Mirroring Disk Volume: Drive 1 2 457.38 GB 457.23 GB In degraded mode Format now... Check now...
What's the deal???
[/b]
-
- New here
- Posts: 6
- Joined: Sat Sep 29, 2007 10:34 am
I have exactly the same issue, also using 2 samsung 500GB (SAMSUNG HD501LJ CR10) in a TS-209 with RAID1.
when I create the raid, it immediately has problems and makes an audible "clunking" noise when checking the drives. After clunking a few times, the raid enters "degraded mode".
remember, these samsung drives are not officially supported in the hardware compatibility list. Is there any solution or should I have bought different drives?
when I create the raid, it immediately has problems and makes an audible "clunking" noise when checking the drives. After clunking a few times, the raid enters "degraded mode".
remember, these samsung drives are not officially supported in the hardware compatibility list. Is there any solution or should I have bought different drives?
-
- New here
- Posts: 6
- Joined: Sat Sep 29, 2007 10:34 am
It seems that something went wrong during my initial run through the installation wizard. I took both HDD out of the NAS, removed all partitions, put them back in the NAS, install wizard appeared when QNAP Finder was run except this time everything went as expected. Now my 209 is running fine in RAID1 - although there was a lengthy RAID resync immediately after install. The hdd spin down and enter standby just as they should.
So it seems SAMSUNG HD501LJ CR10 do work, just as some others have also reported.
So it seems SAMSUNG HD501LJ CR10 do work, just as some others have also reported.
-
- Starting out
- Posts: 10
- Joined: Thu Sep 20, 2007 1:00 am
had to return my ts-209 pro and newegg say that almost all of the one they had in have come back "defective"...Don't stand still...Run...and return you nas of you have a problem....and don't take no for an answer....
I got a readynas instead....Flawless out of the box...No as many features....however you can a 40 in 1 product , but if it doesn't work what's the point of all the features.
Hurry...
I got a readynas instead....Flawless out of the box...No as many features....however you can a 40 in 1 product , but if it doesn't work what's the point of all the features.
Hurry...