Update Firmware

Discussion on setting up QNAP NAS products.
Post Reply
alinghi2007
New here
Posts: 4
Joined: Sun Sep 30, 2007 5:39 am

Update Firmware

Post by alinghi2007 »

How can I update the firmware, if I can't find the TS-101 in the IExplorer??
User avatar
QNAPIvan
Experience counts
Posts: 1020
Joined: Mon Jul 02, 2007 4:03 pm

Post by QNAPIvan »

Please use: http://your NAS IP:6000 to access to your TS-101.
port 6000 is management port of TS-101.

If you have no idea about the IP address of your TS-101. Please run QIW or QNAP finder utility on your Windows PC to find your TS-101.

Log in to the management page then you can update the system in
System Tools> System Update
Cheers,
________________________________________
Product Marketing Director
USA Online Support: http://www.qnap.com/i/useng/before_buy/ ... wone&cid=2
Support email: q_supportus@qnap.com
USA Technical Support: +1 909 595 2782
alinghi2007
New here
Posts: 4
Joined: Sun Sep 30, 2007 5:39 am

Post by alinghi2007 »

I tried this, but i can't get a connection with IExplorer.

When i start the TS-101 with a HDD the the green light is blinking and I don't get an IP adress. If i reboot the TS-101 without a disc, then I get an IP adresse, but i can still not connect the NAS over IExplorer.

Damn.
Post Reply

Return to “Turbo Station Installation & Setup”