Hi there,
I'm unable to access the mediaserver configuration page on xxx.xxx.xxx.xxx:9000
It takes me directly to http://xxx.xxx.xxx.xxx:9000/webbrowse
I need to make some changes to the configuration. Is there any other way to access the setup page? Or what can I do to reset all the configuration, beside reset the entire TS101?
Thanks in advance for your help
Greetings from Portugal
Unable to access UPnP MediaServer configuration page - TS101
-
- First post
- Posts: 1
- Joined: Sat Sep 15, 2007 10:15 pm
-
- Starting out
- Posts: 42
- Joined: Thu Sep 27, 2007 7:46 pm
- Location: Amsterdam
mmm, that's strange. Have you enabled the mediaserver in your administration section?
Are you trying to reach the server from within you're network? perhaps try using the name instead of the ip http://mynas:9000
regards, job
Are you trying to reach the server from within you're network? perhaps try using the name instead of the ip http://mynas:9000
regards, job
- QNAPIvan
- Experience counts
- Posts: 1020
- Joined: Mon Jul 02, 2007 4:03 pm
Please refer to the thred here:
http://forum.qnap.com/phpbb2/viewtopic.php?t=222
Try the command for your TS-101 NAS.
If you still encounter any issue, please mail to our tech support we will look at your case.
Cheers,
http://forum.qnap.com/phpbb2/viewtopic.php?t=222
Try the command for your TS-101 NAS.
If you still encounter any issue, please mail to our tech support we will look at your case.
Cheers,
________________________________________
Product Marketing Director
USA Online Support: http://www.qnap.com/i/useng/before_buy/ ... wone&cid=2
Support email: q_supportus@qnap.com
USA Technical Support: +1 909 595 2782
Product Marketing Director
USA Online Support: http://www.qnap.com/i/useng/before_buy/ ... wone&cid=2
Support email: q_supportus@qnap.com
USA Technical Support: +1 909 595 2782
-
- New here
- Posts: 6
- Joined: Fri Oct 19, 2007 9:36 pm
Same problem here..
..and fix above has not solved it.
Is there a way to go to configuration pages direct?
I used to be able to access this before upgraded to latest firmware 2.1.1 0827
Thanks,
ian
Is there a way to go to configuration pages direct?
I used to be able to access this before upgraded to latest firmware 2.1.1 0827
Thanks,
ian
-
- New here
- Posts: 6
- Joined: Fri Oct 19, 2007 9:36 pm