Hi
Hoping you’ll help me
I have a ts 201 with two 500 gb hdd
Everything was ok until today…
The “I†light blink in red/green and I can not access my shared folders…
When I lauch the utility it tells me to initialize my hdd
so i formated my hdd's but after a while the i light comes blinking again red/green and i have to go throug the initilization process again
changed my hard drives and also tried to change the firmware version but after a moment the "i" light blink again
does my ts201 need repairing i don't know what to do...
2 long days and nights on it....trying to make it work as it uses to...
Please i DO need help .
Lazhar
ts201 problem
- AndyChuo
- Experience counts
- Posts: 2388
- Joined: Thu Sep 13, 2007 11:56 am
- Location: Taipei, Taiwan
Hi alazhar,
We will forward your request to our Technical Support shortly. Sorry for any inconvenience.
Andy
We will forward your request to our Technical Support shortly. Sorry for any inconvenience.
Andy
=============================================================>>>
TS-659-Pro [RAID6] rtorrent+SABnzbdplus+SickBeard+Couchpotato [Best PVR] Plex+PMS [Ultimate Streamer]
Apple iPad [Best Tablet] HTC One M8 [Mobile Phone] Samsung UA46ES6100 [My Screen] KRK Rokit 6 [Audio Speakers]
Chrome Cast [Screen Casting] Philips Hue [Personal Lighing]
Buffalo WZR-1750DHP [My Wifi Hub] D-Link DGS-1005D [Gbit Network]
=============================================================>>>
TS-659-Pro [RAID6] rtorrent+SABnzbdplus+SickBeard+Couchpotato [Best PVR] Plex+PMS [Ultimate Streamer]
Apple iPad [Best Tablet] HTC One M8 [Mobile Phone] Samsung UA46ES6100 [My Screen] KRK Rokit 6 [Audio Speakers]
Chrome Cast [Screen Casting] Philips Hue [Personal Lighing]
Buffalo WZR-1750DHP [My Wifi Hub] D-Link DGS-1005D [Gbit Network]
=============================================================>>>
-
- Starting out
- Posts: 35
- Joined: Sat Sep 15, 2007 10:16 am
Re: ts201 problem
Do you know is the 2 drives are detected?alazhar wrote:Hi
Hoping you’ll help me
I have a ts 201 with two 500 gb hdd
Everything was ok until today…
The “I†light blink in red/green and I can not access my shared folders…
When I lauch the utility it tells me to initialize my hdd
so i formated my hdd's but after a while the i light comes blinking again red/green and i have to go throug the initilization process again
changed my hard drives and also tried to change the firmware version but after a moment the "i" light blink again
does my ts201 need repairing i don't know what to do...
2 long days and nights on it....trying to make it work as it uses to...
Please i DO need help .
Lazhar
-
- New here
- Posts: 3
- Joined: Thu Sep 27, 2007 6:45 am
yes the drives are detected but after a while i have to go through all the initialization process,cause the ts isn't recognize anymore and when i manage to access the configuration page it tells me to initialize it...
i also changed the hdd's but the problem is the same
i even flashed the new firmware ,same problem and then went back to my old firmware...(june one dont remember exactly)
thank you all for your help.
Lazhar
i also changed the hdd's but the problem is the same
i even flashed the new firmware ,same problem and then went back to my old firmware...(june one dont remember exactly)
thank you all for your help.
Lazhar
-
- Been there, done that
- Posts: 700
- Joined: Mon Aug 27, 2007 1:16 pm
- Location: Taipei
- Contact:
Hi alazhar,
Sorry about that. Have you submitted the online support form (in my sig)?
Sorry about that. Have you submitted the online support form (in my sig)?
Online Support Form: http://www.qnap.com/onlinesupport.asp
Support email: q_support@qnap.com.tw
MSN: q.support@hotmail.com
Skype: qnapskype
Support email: q_support@qnap.com.tw
MSN: q.support@hotmail.com
Skype: qnapskype